Payment & Shipping Terms:
|Type:||Self Tapping Screw / Plastite Screw||Grade:||Stainless Steel 304, 316, 18-8|
|Standard:||DIN, JIS, ANSI||Size:||#2 ~ #10, 2.2 ~ 6.3mm|
|Length:||5/32" ~ 4", 4mm ~ 100mm||Head Type:||Flat Undercut|
304/316 Stainless Steel Pozi Drive Flat Undercut Head Blunt Screw for Plastics
The blunt screws are often refered to as Type B thread-forming screws, they require a drilled hole and are typically used in 0.050"-0.200" material.
Undercut screws a shallower head that allows more threading and is good for thin materials. The Pozi-drive was invented to further improve on the torque and cam-out of the Phillips head.
Note: A Phillips Driver will fit into a Pozi screw head but a Pozi driver will not fit into the Phillips screw head, it is not recommended to use a Phillips driver with a Pozi screw as it will eventually round off the recess of the head causing damage to the screw and making it unusable.
|Finish||Plain or Passivated|
|Head Type||Flat Undercut|
|Drive Type||Pozi (PZ)|
|Point Type||Blunt Point|
|Diameter||#2 ~ #14, 2.2 ~ 6.3mm|
|Length||5/32" ~ 4", 4mm ~ 100mm|
|Standard||JIS, DIN, ANSI, IFI|
If you're insterested in our stainless steel pozi flat undercut head self tapping screw, please do not hesitate to send us an email or call us at +8615867456779(Mobile) directly.
For stock, we suggest you double check from us before placing order, thank you!